Heat Insulation GS Foam ( G-4 Foam )

About the product
HEAT INSULATION GS FOAM
Usage of XPE Foam for Industries :-

1. Heat insulation and light inflecting in construction and protection for both cold water and hot water pipe
2. Separation of refrigerator; warm keeping for center air-conditioner, refrigerator and other home appliances
3. Heat insulation, sound absorption and noise reduction for car, train, refrigerator car and laboratory; moisture proof cushion for traveling
4. Packing for special products and cold storage

Our Sun for example , can heat a roof to temperatures as hot as 65 degrees celsius . Even light coloured wall can be heated to as hot as 55 degree celsius .
In an uninsulated house , as much as 40 % of this heat can penetrate through the ceiling alone .

Advantages :-
Closed cell cross linked structure for double heat protection -
( Double Heat Protection ) Reflect and Prevent Heat .
Our GS foam of heat insulation consists of AL ( top layer ) / XPE ( middle layer ) / AL ( bottom layer ) with high density up to 28kg/m³, heat insulate performance higher as compare to the Aluminium bubble foil without EPE foam in the market , overall thickness 10 mm .

It stops 95% radiant heat and bulk to protect against convection heat . multi- layers of obstruction material. It is an environment friendly product which has good heat preservation and insulation properties.
Each layer of the product has good function on abrasion and tearing resistance.
The middle layer (EPE) shows strong ability in moisture barrier, oxygen reduction and sound insulation.

Our Packaging :-
Standard Dimension ( Packaging ) :
Product Dimension :-
~ 10 mm ( Thickness ) x 1.20 meters ( Width ) x 20 meters ( Length ) / roll
= 24 m ² x 10.76 ( m ² convert to ft ² )
= approximately ~ 258.24 ft ² / roll

Product Size : Diameter ~530mm x 1200 mm Length per roll ( ~ 15 kgs / roll )


Contact Sales : 016 2555632
Price
RM 1,000 / Roll
Contact with supplier
BACK TO TOP