Corrugated Switchboard Rubber Mat

About the product
A) Product Name
Model : GS-SL Corrugated Switchboard Matting / Non Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat

B) Raw Material :
NATURAL RUBBER ( NR ) BASE POLYMER

C) Purpose
Switchboard matting is a non-conductive high density rubber compound engineered to prevent electric shock around high voltage equipment.
The non-conductive rubber compound creates an insulating barrier between the electrical source and ground.

D) Scope
Our GS-LV under IEC 61111:2009 Class 1 , Ideal use for Dielectric Voltage / Withstand Voltage : 20,000 VAC and Recommended Maximum use Voltage : 7,500 VAC. ( High Voltage Switchboard Matting )

E) Characteristics
1) MALAYSIAN Brand Name : GS
( eRubber and Heat Insulation Mall ™ )
2) Model Name : GS 20kV ( GS-SL ) Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip Corrugated , with anti slip corrugated surface to provide safe working environment , pattern surface “grabs” the bottom of footwear, improving traction and safe from slippery .
4) Colour : Black
5) Test Certificate
6) Specific gravity : ± 1.50 g/cm³
7) Hardness : 60 ± 5 Shore A
8) Elongation : Min ± 250 %
9) Tensile Strength : Min ± 5 MPa

F) Specification
1) Nominal Thickness : 3mm
BS EN 61111 : 2009 Class 1 ( Withstood 20kV ) , GS-SL
A) Model : GS-SL 4 , Switchboard Matting, ( Black colour ) ,
3mm Tk x 915mm ( 3ft ) Width x 10,000mm ( 10 m ) Length / roll
( Approximately 30kgs / pc )
Price
RM200 / Linear Mtr
Contact with supplier
BACK TO TOP