About the product
Witura’s WT1010SA Alarm System can cover 4 alarm zones within the premises. In addition, the unit can be connected to window breaking sensors, motion detectors and other alarm triggers. Once triggered, alerts can be sent to 8 pre-set numbers.
The unit also completed with 3 remote control zone. You can turn on / off remotely through a sms or phone call your air conditional, generator, sensor, lighting or any other equipment while you not at home. This is to prevent the theft know that you are not at home. You can switch on the lighting in the garden if you not at home at night.
The system comes with 2 remote control units to arm and disarm the alarm system. These remote control units are also multi-functional and can be used not just for arming and disarming the alarm system, but also as an emergency/panic button, as a remote to open the garage door / main gate, to switch on/off electrical appliances within the home.
Beside using the remote control, you also able to arm / disarm remotely the alarm using your mobile phone while you work late in the office or travelling oversea.
Open your auto gate with the remote control of WT 1010SA or connect the WT 1010SA to the basic telephone to open the auto gate by pressing a command at the basic telephone
In order to prevent professional thefts to disconnect GSM by using “GSM Jammer”, Witura spend a lot of money and research to overcome the jammer problem. If any GSM Jammer detected, the unit will call and sent out the SMS immediately and trigger the Siren.
The standby recharger battery to prevent power failure or electricity cut off by intruder. The GSM will function as normal when no electricity supply. The owner also will automatically received the SMS text messages for “battery fail”, “Telecom line fail”, “AC fail” , “INPUT 1 – INPUT 4 fail”, “GSM Alive” if any of the above having problem.
Auto test reporting system – after the owner program the reporting time, the WT 1010SA will dial the programmable number to inform that “GSM Alive”. This is to make sure that in case of emergency, the GSM still will function well.
WT1010SA as a Telephone System
Let’s face it, installing a new phone landline can be a nightmare. From the moment you apply till the time the line is installed, it could take a long while as the date of installation is determined by the availability of personnel from the telephone company. While waiting for installation, there is also the inconvenience of not having a communications line available.
Installation of a landline also normally involves the payment of a deposit, which could be a significant amount of upfront expenditure if it’s for a business premises. Apart from the deposit, there’s also a month phone line rental regardless of whether or not calls are made.
When the time is ready for installation of the landline, for aesthetic purposes, there might be small renovations involved. This will incur additional costs.
The WT1010SA unit can also be connected to a basic telephone and used to make phone calls. Using the WT1010SA as a telephone system has many advantages over traditional landlines.
Firstly, all that’s needed to activate the phone line is a GSM SIM card which is easily applied for can be used almost immediately. The system works with both prepaid and postpaid SIM cards.
In today’s communications environment, many phone calls are made to mobile lines. Mobile phone operators normally have plans that offer very low cost or complimentary calls within the same network. By using a GSM based phone for your premises, it can help to save on your monthly phone bill as there is no monthly phone line rental costs to bear and calls made between landline and mobile lines normally cost more too.
The WT1010SA offers the perfect solution for those who are renting their premises. Apart from the upfront and ongoing savings, when the lease is over, the system can be very quickly dismantled ready to install in your new rented premises.
The unit also completed with 3 remote control zone. You can turn on / off remotely through a sms or phone call your air conditional, generator, sensor, lighting or any other equipment while you not at home. This is to prevent the theft know that you are not at home. You can switch on the lighting in the garden if you not at home at night.
The system comes with 2 remote control units to arm and disarm the alarm system. These remote control units are also multi-functional and can be used not just for arming and disarming the alarm system, but also as an emergency/panic button, as a remote to open the garage door / main gate, to switch on/off electrical appliances within the home.
Beside using the remote control, you also able to arm / disarm remotely the alarm using your mobile phone while you work late in the office or travelling oversea.
Open your auto gate with the remote control of WT 1010SA or connect the WT 1010SA to the basic telephone to open the auto gate by pressing a command at the basic telephone
In order to prevent professional thefts to disconnect GSM by using “GSM Jammer”, Witura spend a lot of money and research to overcome the jammer problem. If any GSM Jammer detected, the unit will call and sent out the SMS immediately and trigger the Siren.
The standby recharger battery to prevent power failure or electricity cut off by intruder. The GSM will function as normal when no electricity supply. The owner also will automatically received the SMS text messages for “battery fail”, “Telecom line fail”, “AC fail” , “INPUT 1 – INPUT 4 fail”, “GSM Alive” if any of the above having problem.
Auto test reporting system – after the owner program the reporting time, the WT 1010SA will dial the programmable number to inform that “GSM Alive”. This is to make sure that in case of emergency, the GSM still will function well.
WT1010SA as a Telephone System
Let’s face it, installing a new phone landline can be a nightmare. From the moment you apply till the time the line is installed, it could take a long while as the date of installation is determined by the availability of personnel from the telephone company. While waiting for installation, there is also the inconvenience of not having a communications line available.
Installation of a landline also normally involves the payment of a deposit, which could be a significant amount of upfront expenditure if it’s for a business premises. Apart from the deposit, there’s also a month phone line rental regardless of whether or not calls are made.
When the time is ready for installation of the landline, for aesthetic purposes, there might be small renovations involved. This will incur additional costs.
The WT1010SA unit can also be connected to a basic telephone and used to make phone calls. Using the WT1010SA as a telephone system has many advantages over traditional landlines.
Firstly, all that’s needed to activate the phone line is a GSM SIM card which is easily applied for can be used almost immediately. The system works with both prepaid and postpaid SIM cards.
In today’s communications environment, many phone calls are made to mobile lines. Mobile phone operators normally have plans that offer very low cost or complimentary calls within the same network. By using a GSM based phone for your premises, it can help to save on your monthly phone bill as there is no monthly phone line rental costs to bear and calls made between landline and mobile lines normally cost more too.
The WT1010SA offers the perfect solution for those who are renting their premises. Apart from the upfront and ongoing savings, when the lease is over, the system can be very quickly dismantled ready to install in your new rented premises.
Contact with supplier
Company