About the product
Fisiosonic® is a new appliance for ultrasound therapy, using an
innovative output stage called Class E.
The mechanical efficiency obtained through the output stage in Class E is
decidedly higher than the one that can be obtained by means of traditional
output stages and allows the operator to issue high powers on the patient
constantly and with a limited thermal effect. Fisiosonic® is the first ultrasound
product manufactured in Italy that uses multifrequency piezo ceramic disks
1 and 3MHz on its applicators. Besides traditional methods, Fisiosonic® has
introduced two innovative functions: sequential treatment and automatic frequency
switching. The sequential treatment offers the operator the opportunity
of using multidisc scanning applicators with a wide contact surface to be
applied by common elastic straps. The ultrasound emission is sequential and
allows the operator to carry out a treatment with an automatic massage on a
wide surface with no need for a manual dedicated intervention.
The automatic frequency switching is obtained by the new exclusive A.F.S.
(AUTOMATIC FREQUENCY SWITCHING) device. This device makes it possible
to exploit the various focalizations of 1 and 3 MHz frequencies at the
same time. For example the operator can set the output time at a frequency
of 1MHz and at a frequency of 3MHz, thus varying the focalization
of the ultrasound beam and obtaining an actual specific massage
under the skin.
Fisiosonic® provides the user with a standard applicator in a 35 mm diameter
with multifrequency ceramic piezoelectric disc.
The appliance can be supplied with the following optional applicators:
• applicator in a 21mm diameter with multifrequency ceramic piezoelectric disc
• applicator in a 55mm diameter with multifrequency ceramic piezoelectric disc
• multidisc scanning applicator with three multifrequency ceramic piezoelectric
discs for automatic sequential treatments with variable scanning times
• double multidisc scanning applicator with six multifrequency ceramic piezoelectric
discs for automatic sequential treatments with variable scanning times
• rotary multidisc scanning applicator.
The applicators are waterproof for underwater treatments.
The instrument can be operated in two modes: continuous and pulsed. In the
continuous operating mode the ultrasound energy causes a noticeable
heating of the tissues being treated and submits them to a mechanical high
frequency massage.
The pulsed operating mode permits to modulate the radiofrequency energy
through a square period wave of 10ms and duty-cycle 10% to 90%, in order
to reduce the thermal effect and keep the peak pressure applied by the
acoustic wave on the tissues steady.
The output power density can be adjusted in continuous 0,1W/cm2 to
3W/cm2.
Fisiosonic® is equipped with self calibration systems and visual and sound
contact control systems.
The appliance is equipped with an inlet for electrotherapy appliance connection
(Modulo series). The operator can then carry out a combined therapy
with any applicator. This method is very useful for instance to exploit a combination
of mechanical effect, deep diathermy, antalgic currents and ionophoresis
with a sharp reduction of the treatment times and an improvement
in terms of therapy results.
Completely managed by a microprocessor of the last generation, Fisiosonic®
combines the handy application of 40 preset therapeutic protocols with the
option of creating and storing new ones in its 10 free memories.
The user’s interface equipped with a membrane keyboard and a LCD, have
a decidedly modern and professional look.
The results obtained through the experiments carried out at university have
proven that besides the effectiveness in reducing the crystal density in fibrocalcific
lesions of soft tissues, Fisiosonic® is essential in improving histic
distensibility and mobility, which is reduced in chronic degenerative processes.
innovative output stage called Class E.
The mechanical efficiency obtained through the output stage in Class E is
decidedly higher than the one that can be obtained by means of traditional
output stages and allows the operator to issue high powers on the patient
constantly and with a limited thermal effect. Fisiosonic® is the first ultrasound
product manufactured in Italy that uses multifrequency piezo ceramic disks
1 and 3MHz on its applicators. Besides traditional methods, Fisiosonic® has
introduced two innovative functions: sequential treatment and automatic frequency
switching. The sequential treatment offers the operator the opportunity
of using multidisc scanning applicators with a wide contact surface to be
applied by common elastic straps. The ultrasound emission is sequential and
allows the operator to carry out a treatment with an automatic massage on a
wide surface with no need for a manual dedicated intervention.
The automatic frequency switching is obtained by the new exclusive A.F.S.
(AUTOMATIC FREQUENCY SWITCHING) device. This device makes it possible
to exploit the various focalizations of 1 and 3 MHz frequencies at the
same time. For example the operator can set the output time at a frequency
of 1MHz and at a frequency of 3MHz, thus varying the focalization
of the ultrasound beam and obtaining an actual specific massage
under the skin.
Fisiosonic® provides the user with a standard applicator in a 35 mm diameter
with multifrequency ceramic piezoelectric disc.
The appliance can be supplied with the following optional applicators:
• applicator in a 21mm diameter with multifrequency ceramic piezoelectric disc
• applicator in a 55mm diameter with multifrequency ceramic piezoelectric disc
• multidisc scanning applicator with three multifrequency ceramic piezoelectric
discs for automatic sequential treatments with variable scanning times
• double multidisc scanning applicator with six multifrequency ceramic piezoelectric
discs for automatic sequential treatments with variable scanning times
• rotary multidisc scanning applicator.
The applicators are waterproof for underwater treatments.
The instrument can be operated in two modes: continuous and pulsed. In the
continuous operating mode the ultrasound energy causes a noticeable
heating of the tissues being treated and submits them to a mechanical high
frequency massage.
The pulsed operating mode permits to modulate the radiofrequency energy
through a square period wave of 10ms and duty-cycle 10% to 90%, in order
to reduce the thermal effect and keep the peak pressure applied by the
acoustic wave on the tissues steady.
The output power density can be adjusted in continuous 0,1W/cm2 to
3W/cm2.
Fisiosonic® is equipped with self calibration systems and visual and sound
contact control systems.
The appliance is equipped with an inlet for electrotherapy appliance connection
(Modulo series). The operator can then carry out a combined therapy
with any applicator. This method is very useful for instance to exploit a combination
of mechanical effect, deep diathermy, antalgic currents and ionophoresis
with a sharp reduction of the treatment times and an improvement
in terms of therapy results.
Completely managed by a microprocessor of the last generation, Fisiosonic®
combines the handy application of 40 preset therapeutic protocols with the
option of creating and storing new ones in its 10 free memories.
The user’s interface equipped with a membrane keyboard and a LCD, have
a decidedly modern and professional look.
The results obtained through the experiments carried out at university have
proven that besides the effectiveness in reducing the crystal density in fibrocalcific
lesions of soft tissues, Fisiosonic® is essential in improving histic
distensibility and mobility, which is reduced in chronic degenerative processes.
Price
7,836 RM
Contact with supplier
Company